Item comparison

End item comparison

RF pushbutton sensor, 3-gang for KNX
System 55 start-up rocker

SCHUKO socket outlet 16 A 250 V~ with increased contact protection (Safety Plus), without mounting claws

Display item
Remove item

Overview

Specification:

Order No.: 5103 00

Packing unit: 1

PS: 06

EAN: 4010337017257

Overview

Specification: pure white glossy

Order No.: 4755 70

Packing unit: 1/5

PS: 01

EAN: 4010337117513

Features

Confirmation function as well as transmit and status display by 2-colour LED (red/green) separately for each button by 2-stage display function.
Optional status display by separate 1-bit status communication objects.
Transmit and confirmation display can be switched off.
The touch sensor can be attached to walls using screws or affixed to smooth or transparent surfaces using a mounting plate.
Project planning, commissioning and parameter setting are performed using ETS (version 5 or later).
Battery-operated device.

"Switching" function

Rocker or push-button function.
Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no reaction).

"Dimming" function

Rocker function.
Command when the rocker is pressed (right and left button) can be set in the parameters (lighter - ON, darker - OFF).

"Blind" function

Rocker function.
Command when the rocker is pressed (right and left button) can be set in the parameters (ON, OFF, CHANGE).
Time between short and long-term command can be set in the parameters.

"Value transmitter" and "Scene auxiliary unit" functions

Rocker function.
Command when the rocker is pressed (right and left button) can be set in the parameters (values 0 to 255, 0 to 100% or scene number).
With scene auxiliary unit: Memory function possible.

Features

Simplified installation thanks to patented arrangement of the large keyhole profiles using box screws.
Low installation depth.
Large, ergonomically shaped release levers.
Sturdy earth bar with solid earthing fingers.
Sturdy and corrosion-resistant steel support ring.
Shatter-proof thermoplastic base.

Technical data

KNX medium:

RF1.R

Start-up mode:

S mode

Rated voltage:

DC 3 V

Batteries:

1 x CR 2450N

Ambient temperature:

-5 °C to +45 °C

Wireless frequency:

868.3 MHz

Transmission power:

max. 20 mW

Range (free field):

approx. 100 m

Battery

Type:

CR 2450N

UN no.:

3091

Technical data

Installation depth:

32 mm

Conductors:

Rigid and flexible

Connection cross section

for conductors from:

1.5 mm² to 2.5 mm²

Ambient temperature

increased contact protection:

0°C to +45°C

Notes

Batteries are consumables and must be replaced regularly. Please observe the regulations on the disposal of used batteries.
The pushbutton sensor is delivered with a program-neutral start-up rocker. The suitable rocker set for the switch range must be ordered separately.
The range may be reduced when using metal rocket sets and/or metal cover frames.

Notes

With increased contact pressure of the grounding bar tested in compliance with T.N.O.
Increased contact protection (Safety Plus) in accordance with DIN VDE 0620-1.
Increased contact protection (Safety Plus) in accordance with IEC 60884-1.